| Peer-Reviewed

Microstructure and Mechanical Properties of High-silicon K52 Pipeline Steel in Cold Area

Received: 10 May 2017     Published: 11 May 2017
Views:       Downloads:
Abstract

In this paper, high-silicon K52 and API X52 were studied comparatively, which were with similar yield strength. The results showed that K52 with high-silicon and low-manganese asked for higher tensile strength, lower yield ratio and higher impact energy than API X52. K52 was successfully producted with more content of Nb, V, Ti and so on, which is with high tensile strength, low yield ratio and high impact energy. The oxide scale of K52 was more thichness because of the high-silic. The thickness of oxide scale could be reduced by the lower tapping temperature during hot rolling. The inclusion of silicon oxide was bad fot the toughness of welding line, which was forming during the welding process.The squeeze amount should be increased to improve the impact energy of welds.

Published in Science Discovery (Volume 5, Issue 3)
DOI 10.11648/j.sd.20170503.11
Page(s) 164-168
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2017. Published by Science Publishing Group

Keywords

K52, High-Silicon, Pipeline Steel, Oxide Scale

References
[1] 王晓香.我国天然气工业和管线钢管发展展望[J].焊管,2010,33(3):5-9.
[2] 高惠临.管线钢与管线钢管[M].中国石化出版社,2012,6-7.
[3] 万朝晖.俄罗斯油气输送用焊接钢管标准及认证初探[J].焊管,2014,37(3):60-67.
[4] 谢勇,李记科,李云龙,等.俄罗斯油气输送钢管标准与国内标准对比分析[J].焊管,2008,31(1):88-92.
[5] 王畅,于洋,牛涛,等.X80管线钢高温氧化膜的生长机理[J].钢铁研究学报,2016(5):57-63.
[6] 高惠临.管线钢屈强比分析与评述[J].焊管,2010,33(6):10-14.
[7] 王松涛,李敏,朱立新,等.Si含量对热轧卷板表面氧化铁皮的影响[J].热加工工艺,2011,40(16):50-52.
[8] Tomoki Fukagawa, Hikaru Okada, Yasuhiro Maehar. Mechanism of Red Scale Defect Formation in Si Added Hot Rolled Steel Sheets. ISIJ International, 1994, 34 (11):906-911.
[9] 杨峰,欧鹏.热轧产品红色氧化铁皮成因及消除方法研究[J].钢铁,2006,41(增刊2):380-385.
[10] 安成钢,牛涛,崔阳,等.俄罗斯高硅管线钢K52焊缝缺陷影响因素分析[J].热加工工艺,2016(5):204-207.
Cite This Article
  • APA Style

    An Chenggang, Niu Tao, Wu Xinlang, Dai Xiaoli, Yu Cheng, et al. (2017). Microstructure and Mechanical Properties of High-silicon K52 Pipeline Steel in Cold Area. Science Discovery, 5(3), 164-168. https://doi.org/10.11648/j.sd.20170503.11

    Copy | Download

    ACS Style

    An Chenggang; Niu Tao; Wu Xinlang; Dai Xiaoli; Yu Cheng, et al. Microstructure and Mechanical Properties of High-silicon K52 Pipeline Steel in Cold Area. Sci. Discov. 2017, 5(3), 164-168. doi: 10.11648/j.sd.20170503.11

    Copy | Download

    AMA Style

    An Chenggang, Niu Tao, Wu Xinlang, Dai Xiaoli, Yu Cheng, et al. Microstructure and Mechanical Properties of High-silicon K52 Pipeline Steel in Cold Area. Sci Discov. 2017;5(3):164-168. doi: 10.11648/j.sd.20170503.11

    Copy | Download

  • @article{10.11648/j.sd.20170503.11,
      author = {An Chenggang and Niu Tao and Wu Xinlang and Dai Xiaoli and Yu Cheng and Zhang Caixia},
      title = {Microstructure and Mechanical Properties of High-silicon K52 Pipeline Steel in Cold Area},
      journal = {Science Discovery},
      volume = {5},
      number = {3},
      pages = {164-168},
      doi = {10.11648/j.sd.20170503.11},
      url = {https://doi.org/10.11648/j.sd.20170503.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20170503.11},
      abstract = {In this paper, high-silicon K52 and API X52 were studied comparatively, which were with similar yield strength. The results showed that K52 with high-silicon and low-manganese asked for higher tensile strength, lower yield ratio and higher impact energy than API X52. K52 was successfully producted with more content of Nb, V, Ti and so on, which is with high tensile strength, low yield ratio and high impact energy. The oxide scale of K52 was more thichness because of the high-silic. The thickness of oxide scale could be reduced by the lower tapping temperature during hot rolling. The inclusion of silicon oxide was bad fot the toughness of welding line, which was forming during the welding process.The squeeze amount should be increased to improve the impact energy of welds.},
     year = {2017}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Microstructure and Mechanical Properties of High-silicon K52 Pipeline Steel in Cold Area
    AU  - An Chenggang
    AU  - Niu Tao
    AU  - Wu Xinlang
    AU  - Dai Xiaoli
    AU  - Yu Cheng
    AU  - Zhang Caixia
    Y1  - 2017/05/11
    PY  - 2017
    N1  - https://doi.org/10.11648/j.sd.20170503.11
    DO  - 10.11648/j.sd.20170503.11
    T2  - Science Discovery
    JF  - Science Discovery
    JO  - Science Discovery
    SP  - 164
    EP  - 168
    PB  - Science Publishing Group
    SN  - 2331-0650
    UR  - https://doi.org/10.11648/j.sd.20170503.11
    AB  - In this paper, high-silicon K52 and API X52 were studied comparatively, which were with similar yield strength. The results showed that K52 with high-silicon and low-manganese asked for higher tensile strength, lower yield ratio and higher impact energy than API X52. K52 was successfully producted with more content of Nb, V, Ti and so on, which is with high tensile strength, low yield ratio and high impact energy. The oxide scale of K52 was more thichness because of the high-silic. The thickness of oxide scale could be reduced by the lower tapping temperature during hot rolling. The inclusion of silicon oxide was bad fot the toughness of welding line, which was forming during the welding process.The squeeze amount should be increased to improve the impact energy of welds.
    VL  - 5
    IS  - 3
    ER  - 

    Copy | Download

Author Information
  • Shougang Research Institute of Technology, Beijing, China

  • Beijing Key Laboratory of Green Recyclable Process for Iron & Steel Production Technology, Beijing, China

  • Shougang Qian’an Steel Company, Qian’an, China

  • Beijing Key Laboratory of Green Recyclable Process for Iron & Steel Production Technology, Beijing, China

  • Shougang Qian’an Steel Company, Qian’an, China

  • Shougang Qian’an Steel Company, Qian’an, China

  • Sections